Anritsu- Signalling Tester (Base Station Simulator) (Model:MD8475A)

0
63
Vui lòng liên hệ với chúng tôi– chúng tôi sẽ liên hệ lại với khách hàng bằng điện thoại hoặc email.
Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. ​​Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.

Features

  • Supports multimode terminals
    (LTE FDD (2×2 MIMO), W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, CDMA2000® 1X/1xEV-DO Rev. A)
  • Simple operation software supports test conditions and service/call-processing function tests
  • Built-in CFCS server function supports GUI-based IMS service tests, such as VoLTE
  • LTE data throughput up to 100 Mbps (downlink) and 50 Mbps (uplink)
  • All-in-One DC-HSDPA 43.2 Mbps Support
  • Supports 2-cell test environment, including InterRAT Cell Reselection, Redirection, Cell Change, CS-Fallback, etc.
  • Built-in PC with control and application server functions reduces benchtop footprint

Description

The MD8475A Signalling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellent cost-performance.

A full line of test environments are supported for the general mobile verification phase, such as max. throughput performance tests, stress tests, and battery consumption tests of multisystem LTE mobiles using 2×2 MIMO, as well as CS-Fallback, call connection reliability and stability tests at handover, communication tests at low RF power, and service verification using LTE Multiple PDN and SMS in a 2-cell environment*.
In addition, test conditions are easily set using the SmartStudio GUI, helping cut test environment configuration time.

*: Supports combination of LTE/LTE, LTE/W-CDMA, LTE/GSM and LTE/CDMA2000; requires two MD8475A units for testing LTE/CDMA2000.

MD8475A Signalling Tester System Configurations LTE/W-CDMA/GSM/CDMA2000

Specifications

SmartStudio Test Functions

Function Description LTE FDD W-CDMA GSM CDMA
 2000
 General  Location registration
 Out of service Setting  Sets BTS Power output to OFF and sets UE to outside NW condition
 Power Control for GUI  Power control for BS is changed into IDLE and Communication
 L1/L2 Countor  Measured values indicating the performance of Layer 1 and Layer 2
 RF Monitor  The channel power, such as frequency, a frequency error and PDSCH, and PUSCH, is displayed
 Throughput Monitor  Actual data throughput can be verified at a fixed rate or at a rate determined by UE
 Trace view  The sequence of each layer is displayed on real time
 Voice/
 Video Call
 W-CDMA
 GSM
 CDMA2000
 UE originated/terminated
voice call
(Loop-back/Echo-back)
 Performs loop-back communication test*1
 UE originated/terminated
voice call (Handset)
 Performs handset communication test
 Emergency Call  Performs Emergency Call test with or without Test SIM*2
 Voice call released
 Caller ID Setting  Performs Show ID/Hide ID/Unknown ID/Payphone/International call settings
 Access Class Barred
(Release99) [Barred]
 Bars all calls according to Release 99 standard
 Access Class Barred
(Release99) [Emergency]
 Bars all calls except emergency calls according to Release 99 standard
 Access Class Barred
(PSIST/ACCT)
 Bars all calls according to CDMA2000
 W-CDMA  UE originated/terminated
video call (Loop-back)
 Performs loop-back communication test*1
 Video call released   
 Packet
 Connection
 IPv4 Packet test  Data supporting IPv4 can be sent and received
 IPv6 Packet test  Data supporting IPv6 can be sent and received
 Packet Preservation/Dormant testing  Releases RRC Connection while maintaining PDN Bearer
 LTE FDD  UE originated/terminated
SISO/MIMO packet call*3
 Performs application tests utilizing packet data communications by connecting to server
 SISO/MIMO packet call
released
 Multiple PDN Bearer  Performs Multi Session packet communications test (Maimu 8 pass)
 W-CDMA UE originated/terminated
W-CDMA/HSPA packet call*4
 Performs application tests utilizing packet data communications by connecting to server
 UE originated/terminated
HSPA Evolution/DC-HSDPA
packet call*5
 Performs application tests utilizing packet data communications by connecting to server
 W-CDMA/HSPA/HSPA Evolution/DC-HSDPA packet
call released
 RRC Status Change  The mobile RRC Status can be changed during packet data communications
 (Cell DCH ⇔ Cell FACH ⇔ Cell PCH)
 UE originated PPP packet call  Performs PPP (Built-in server) packet data communication test (Not support Serial connection)
 PPP packet call released Performs PPP (Built-in server) packet data communication test
 GSM  UE originated/terminated
GPRS/EGPRS packet call*6
 Performs application tests utilizing packet data communications by connecting to server
 GPRS/EGPRS packet call
released
 CDMA2000  UE originated CDMA2000/
EVDO packet call*7
 Performs application tests utilizing packet data communications by connecting to server
 CDMA2000/EVDO
packet call released
 Messaging  SMS transmission/reception  Performs SMS (7bit-ASCII, Unicode, Binary) test*1
 Continuous SMS Sending  Performs continuous sending of multiple SMS messages to UE
 MMS transmission/reception*8  Performs MMS transmission/reception test
 2-Cell
 Testing*9 *10
 Cell Selection/Reselection
 (LTE FDD → LTE FDD)
 Performs Cell Selection/Reselection tests between two LTE FDD cells
 Cell Redirection
 (LTE FDD → W-CDMA)
 Performs tests between W-CDMA system from LTE FDD system without continuous packet connectivity
 Cell Change Order
 (LTE FDD → GSM)
 Performs tests between GSM system from LTE FDD system without continuous packet connectivity
 CS Fallback
 (LTE FDD → W-CDMA)
 Performs tests between W-CDMA system from LTE FDD system for voice
 CS Fallback (LTE FDD → GSM)  Performs tests between GSM system from LTE FDD system for voice

            *1: The opposite examination using two sets of move machines cannot be performed.
            *2: Test USIM does not use by CDMA2000
            *3: Requires MIMO option (MD8475A-001, MX847550A-020)
            *4: Requires HSPA option (MX847510A-001)
            *5: Requires HSPA Evolution/DC-HSDPA option (MX847510A-011)
            *6: Requires EGPRS option (MX847520A-001)
            *7: Requires 1xEV-DO option (MD8475A-032)
            *8: Requires separate MMS application sever
            *9: Requires 2nd RF option (MD8475A-001) and Multi-cell Software (MX847502A)
            *10: Not support for CDMA2000

Specifications

Items Specifications
 RF Connector  RF input/output connector (RF Main, RF Aux1, RF Aux2)
     Connector: N type, Impedance: 50 Ω, VSWR: ≤1.5 (500 MHz to 3 GHz)
 Reference oscillator
     Frequency: 10 MHz
     Level: TTL level
     Connector: BNC type
     Startup characteristics: ±5 × 10−8 (5 minutes after power-on, referenced to frequency 24 hours
                                               after power-on)
     Aging rate: 2 × 10−8/day, ≤1 × 10−7/year (referenced to frequency 24 hours after power-on)
     Temperature characteristics: ≤±2 × 10−8
 External reference input
     Frequency: 10 MHz, Acceptable frequency range: ±0.5 ppm, Level: ≥0 dBm, Impedance: 50 Ω,
     Connector: BNC type
 Transmission Characteristics  Frequency
     Frequency range: 350 MHz to 3.6 GHz
     Setting resolution: 100 kHz (Depending on MX847501A used)
     Accuracy: Based on reference oscillator accuracy
 Output level
     Level range: −130 to −10 dBm (Main, Aux1, Aux2)
     Resolution: 0.1 dB
     Level accuracy: ±1.0 dB (−120 dBm ≤ Output level, 350 MHz ≤ Frequency ≤ 3 GHz)
                                 ±1.2 dB (−120 dBm ≤ Output level, 3 GHz < Frequency ≤ 3.6 GHz)
 Signal purity
     Non-harmonic spurious: ≤−40 dBc (at ≥500 kHz frequency offset)
     Harmonics: ≤−25 dBc
     Modulation accuracy
         W-CDMA: ≤3.5% rms (with MD8475A-010, MD8475A-011)
         GSM: ≤1.5°rms (with MD8475A-020)
         LTE: ≤3.5% rms (with MD8475A-050)
         CDMA2000 1X: ρ >0.995 (with MD8475A-030)
         1xEV-DO: ρ >0.995 (with MD8475A-032)
 Reception Characteristics  Frequency
     Frequency range: 350 MHz to 3.6 GHz
     Setting resolution: 100 kHz (Depending on MX847501A used)
 Level
     Maximum input level: +35 dBm (Average)
     Input level range: −60 to +35 dBm (with MD8475A-010, MD8475A-011, MD8475A-030, MD8475A-032,
                                      MD8475A-050)
                                    −30 to +40 dBm (in-burst average power) (with MD8475A-020)
     Reference level: −60 to +35 dBm
 Variable range
     Rx level setting resolution: 1 dB
 General  Display: Color TFT LCD screen, 12.1 inches (wide type), 1280 × 800 dots
 External interface
     Trigger I/O: BNC
     Call Proc Timing I/O: 15-pin mini D-Sub connector
     Call Proc Serial I/O: D-sub connector, RS-232C level
     Call Proc Ethernet A: RJ45 connector, 10/100/1000BASE-T level
     Call Proc Ethernet B: RJ45 connector, 10/100/1000BASE-T level
     Handset: RJ-11 connector
     Headphone: 3.5-mm dia. headphone jack
     Microphone: 3.5-mm dia. microphone jack
     USB: USB2.0, Type A, 4 ports
     RS-232C: D-sub connector, conforms to RS-232C
     GPIB: IEEE488 connector
     VGA: Mini D-Sub connector
     Ethernet: RJ-45 connector 10/100/1000BASE-T, 2 ports
 Power Supply  100 Vac to 120 Vac (±10%)/200 Vac to 240 Vac (−15%/+10%, Max.: 250 Vac), 50 Hz to 60 Hz (Rating),
 ≤480 VA (Max.)
 Dimensions and Mass  426 (W) × 221.5 (H) × 398 (D) mm (excl. protrusions),<25 kg (with all options)
 Temperature Range & Humidity  Operation: +5° to +40°C, Storage: −20° to +60°C, ≤90% (no condensation)
 EMC  EN 61326-1, EN 61000-3-2
 LVD  EN 61010-1
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó. Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 02873000184 | Anritsu- Signalling Tester (Base Station Simulator) (Model:MD8475A).

LEAVE A REPLY

Please enter your comment!
Please enter your name here