Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
The DPI 811/812 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
The DPI 811 RTD Calibrator measures or simulates RTD sensors and is the ideal tool for checking probes, indicators, recorders and controllers.
Features
- High performance, low cost
- Measure and source RTD’s
- 2, 3 and 4 wire auto detection
- Temperature test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch verification
|
Applications
- Temperature test and maintenance
- Transmitter calibration
- Loop set-up and diagnostics
- Switch testing
The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.
|
Specifications
Temperature Test and Measurement
| DPI 811 RTD Calibrator |
Measures or simulates RTD sensor and is the ideal tool for checking probes, indicators, recorders and controllers |
| Automatic Detection of Two-, Three- and Four-Wires |
Quickly detects faulty sensors and wiring |
| Pulsed RTD Transmitter Compatibility |
Simulation mode |
| Advanced Features |
Step, ramp, maximum/minimum/average hold and facilitate troubleshooting and system checks |
Temperature Instrumentation and Loop Maintenance
| DPI 812 RTD Loop Calibrator |
Provides simultaneous RTD output and mA measurement for transmitter/loop maintenance |
| 24V Loop Power Supply |
Energizes transmitters and control loops |
| Automatic Switch Test |
Captures open/closed trip values providing a fast and highly accurate “safety system” check |
| HART Resistor |
Can be switched into the loop when required by a HART digital communicator and avoids the inconvenience of carrying a 250 O resistor |
IDOS™ Flexibility
| Intelligent Digital Output Sensor (IDOS) |
Universal Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar). |
| Total Flexibility |
IDOS modules can be used with any compatible instrument; for example, a DPI 812 RTD loop calibrator can become a fully featured pressure calibrator. |
| Plug and Play |
Modules are interchangeable between instruments, requiring no set-up or instrument calibration.
Please refer to IDOS Universal Pressure Modules data sheet. |
DPI 800 Series Common Specification
| Operating Temperature |
14°F to 122°F (-10°C to 50°C) |
| Storage Temperature |
-4°F to 158°F (-20°C to 70°C) |
| Humidity |
0% to 90% non-condensing, Def Stan 66-31, 8.6 Cat III |
| Shock and Vibration |
BS EN61010:2001, Def Stan 66-31, 8.4 Cat III |
| EMC |
BS EN61326-1:1998 + A2:2001 |
| Safety |
Electrical BS EN61010:2001, CE marked |
| Display |
Graphic LCD with backlight. Resolution 99999 |
| Size and Weight |
7.1 in x 3.3 in x 2 in (180 mm x 85 mm x 50 mm), 14 oz (400 g) |
| Batteries |
3 AA alkaline, >70 hours measure, >10 hours 24 mA source (24V @ 12 mA) |
|
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó.
Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 086 9421303 | 02873000184 | DRUCK-RTD Calibrator/Loop Calibrator ( Model: DPI 811/812).
Comments are closed.